Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Wheels

Shimano Deore XT M756 6-Bolt Disc Front Hub
$50.00
Shimano XT M756 front hub. - Double contact sealing - Super polished bearing races for low friction rolling - Light alloy QR lever and nut - 6-bolt ISO disc mounting surface
Roval Rapide C 38 Disc Wheelset
$1,100.00
Performance Upgrade Made Easy The C38 brings carbon fiber high performance to the real world. It's a versatile all-rounder equally at home crushing gravel washboards and summiting alpine passes. Optimized for use with modern wide tires, providing the right amount of sidewall support to facilitate surefooted handling in all conditions, the C38 wheelset is a great handling, lively climbing, robust all-road performer that also aerodynamically outperforms many deeper, aero-specific rims that cost twice as much. Carbon wheels are a true performance upgrade to any bike, but too often the price tag puts them out of reach. The Rapide C38 shatters that barrier and brings a class-leading Roval carbon rim and DT Swiss reliability together to provide riders with the best performance carbon wheel per dollar.
Roval Traverse Fattie 29 Wheelset
$600.00
Traverse means to ride up, across and down, which is exactly what Roval's Traverse Fattie 29 Wheelset does best. Made with tough Specialized E5 aluminum rims laced with pro-level DT Swiss spokes and nipples, these wheels are a sure fire way to supercharge your trail riding. The 29mm internal rim width supports tire sidewalls better for increased volume, allowing lower pressures, more grip, less air burping, and a ride that feels like your bike gained an extra inch of travel. You can run them with or without tubes and the front hub is compatible with 20mm or 15mm through-axles. The rear hub, replete with DT Swiss 360 internals, comes with end caps for a 135mm quick release or a 12x142mm through axle.
Giant AM 27.5 Disc Rear MTB Wheel
$199.00 - $209.00
- Disc brake only - Sealed bearing hubs - 30mm Tubeless Ready rim - Does not include axles, tape, or tubeless components
SRAM MTH 746 Rear Hub
$85.00
Whether your joy comes from barreling downhill, or tearing up to the top, SRAM's MTH 746 rear hub will leave a smile on your face. An aluminum hubshell with machined flanges grant the hub a low weight without compromising durability. Plus, tough cartridge bearings roll smooth for the long haul.
SRAM 746 Rear Disc Hub
$143.00
High quality sealed bearing hub is available in traditional and modern configurations. - Steel axle, aluminum end caps with steel knurled contact surfaces - Same proven driver mechanism as higher priced models - Spoke Interface: J-Bend - Hub/Brake Compatibility: 6-Bolt Disc - Skewer Included: No - Bearing Type: Sealed Cartridge
Serfas 2 Tubeless Presta Valves
$26.00 - $29.00
Switching to tubeless or in need of valve replacements? Serfas Tire RX replacement valves will do the trick. Available sizes of 32mm, 44mm, or 60mm valves with removable cores, extra valve core, and Schrader to Presta adapter with core removal tool. Please note, Due to the multi-step chemical process and variables involved in anodizing, colors may vary slightly between batches produced.
SRAM X9 Freehub Body
$21.00
- SRAM, X9, Freehub Body, 11.2015.028.100
Giant P-R2 Front
$116.00
- Rim brake only - Sealed bearing hubs (QR 100) - Dynamic Balanced Lacing technology - Tubeless Ready rim - Does not include QR, tape, or tubeless components
Giant AM 27.5 Disc Front MTB Wheel
$168.00 - $175.00
- Disc brake only - Thru Axle sealed bearing hubs - 30mm Tubeless Ready rim - Does not include axles, tape, or tubeless components
Giant Rim Tape MTB/Trekking 18mm
$20.00
Features - Strong nylon reinforced material handles high-pressures - Adhesive backed for a secure fit - Does not rot - 0.5mm thick
Salsa Deadbolt Ultralight Rear Thru-Axle
$39.00
The Deadbolt Ultralight Thru-Axles are offered in a 6mm flat button-head design, for a flush, clean look. Lightweight, easy to use, and secure. - CNC-machined from 7000 series aluminum - One-piece design - Designed to fit all current Salsa thru-axle frames - For other frames, check with the manufacturer for compatibility and other specifications - 6 mm hex wrench required for installation
Salsa Deadbolt Thru-Axle
$49.00
The Deadbolt Thru-Axles feature the classic-looking Salsa lever and can be adjusted to return to the desired position when properly tightened. Lightweight, easy to use, and secure. - CNC-machined from 7000 series aluminum - Designed to fit all current Salsa thru-axle frames - For other frames, check with the manufacturer for compatibility and other specifications
Surly Ultra New Front Hub
$60.00
Track stars and fixed-gear converts will love Surly's Ultra New Front Hub. This gorgeous hunk of aluminum sports sealed bearings for all-weather reliability and low friction. And, the hollow axle is forged from flex-free chromoly for steering precision, long-lasting durability and simple quick-release compatibility.
WTB TCS AL 34mm Presta Valve
$24.95 - $25.95
WTB's TCS AL valves are aluminum to shed grams, and come in catchy anodized red, black, or blue. A stepped lock nut adds compatibility among various rim drillings, a smooth pump interface makes adding air easy, and a removable core makes setting beads and injecting sealant a cinch. - Presta - 34mm
Wheels Manufacturing Outer Axle Nut
$1.80 - $2.00
Wheels Manufacturing Outer Axle Nuts are high-grade steel nuts that provide secure wheel fixing for solid-axle wheels. - 14mm x 1mm (1411-AN) sold in pairs - All others sold individually
Odyssey Clutch V2 Freecoaster Hub
$189.00
The Clutch Hub is a traditional clutch-based coaster hub design that eliminates all of the problematic elements on ordinary hubs and only keeps the parts that work. A new, super-strong FULL 14mm axle, bearing configuration, and drag mechanism design stops the need for constant repairs. Equipped with external slack adjustment, which can be done with a 2.5mm hex key through a hub shell access hole (can be adjusted without removing the wheel), and an improved plastic hub guard spec. Same Clutch coaster hub you’ve come to love, but with a few upgrades. Features: - Maximum strength axle design - Super-durable bearing arrangement throughout - 2.5mm hex key slack adjustment through hub shell access hole. No wheel removal required. - Super-durable drag mechanism design - Crankflip ready Improvements Over the Clutch V1: - 14mm chromoly axle bolts on both the drive and non-drive side for greater reliability - Improved clutch engagement - Improved manufacturing precision throughout - More slack than the V1 hub - All-new durable proprietary plastic spec for the removable hub guard Specs: - 36-hole, 2014-T6 aluminum shell - 9T Driver - Left or right hand drive - 22 oz / 623g Guard Options: - Plastic hub guard included (but optional to use) - Alloy hub guard also available
Robert Axle Project Rear Lightning Bolt-On Thru Axle
$48.00 - $56.00
After years of mountain biking with thru-axles with bulky handles that seemed to strike every trailside obstacle, we needed a better option. Our Lightning Bolt-On thru axles offer a high-quality, simple, lightweight alternative to that bulky handle. Available in a range of sizes that fit both front and rear wheels on all types of thru-axle-equipped bikes. - Lightning is Better—Our front and rear Lightning Bolt-On axles offer a stronger, more durable, lower profile, and lighter weight option to replace your stock thru-axles. - Low Profile—No more bulky handles to strike trail obstacles. Aerodynamic design. - Light Weight—Our axles are internally bored to remove unnecessary material without compromising strength. - Easy to install—Our matching front and rear Lightning Bolt-On Axles require only a standard 6mm hex wrench for easy installation and removal. - Better Tolerances—Manufactured in the USA to the tightest tolerances using aerospace materials and CNC manufacturing. No longer will your axle loosen while riding.
Robert Axle Project Trainer Thru Axle
$54.00 - $65.00
Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability. - No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world. Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.
DT Swiss G 540 Disc 700c
$89.00
This wide rim tackles bumpy sections and holds up to hard hits. Enjoy the long rides! The sleeved aluminum gravel rim is the ideal choice for riding over gravel, roots, or small obstacles on unpaved paths. The robust, all-round rim, with its inner width of 24mm and its wide knobby tires up to 53mm, is suitable for various purposes and provides great comfort.
DT Swiss 240 Classic MTB Front Hub
$229.00 - $230.00
The number to count on—240 with Ratchet EXP. The new 240 is developed for riders with the most extreme ambitions. The latest version of the hub is equipped with the Ratchet EXP system to maximize reliability. The increased bearing distance increases bearing lifetime, the straight spring provides more direct engagement (which reduces wear), and a smaller number of parts not only makes maintenance easier, but also reduces weight.
Problem Solvers Axle Nut
$3.00
The Problem Solvers Axle Nut is perfect for wheels with solid axles (also called bolt-on axles). This quality nut is made of durable chrome-plated steel and features a built-in integrated rotating washer to hold tight.
Roval Roval Control 29 148
$650.00
When you think of lightweight XC wheels, aluminum probably doesn't come to mind. In reality, though, high-grade alloy wheels have all of the tremendous performance properties found in carbon, like light overall weight, durability, and resilience to impact. And when made with the right hands, they're perfect for competitive racers and everyday trail riders alike. The problem is that, while many carbon wheels can check these boxes with ease, most alloy wheels don't live up to these expectations. In the case of the Control 29 wheels, however, there’s finally an aluminum wheelset that's truly ready to race. What sets the Control 29 wheels apart is that they share many of the same advanced technologies as our carbon version, the Control SL. They adopt the same rim shape with a 25-millimeter inner width, extensive on-trail testing, and our Zero Bead Hook technology. Our Zero Bead Hook rim takes away the dated mountain wheel design known as a bead hook. This hook is the part of the rim that crests at the top, sitting several millimeters inward from the rim’s sidewall, and it catches the tire’s bead under its hook. We know this may not sound too bad, but the hook establishes a weak spot in the rim that's easily crushed or bent. Without a hook, a rim can be manufactured to much tighter tolerances and can be made lighter due to the hook not needing to be reinforced. For these wheels, this means that we're able to nearly equal the strength of carbon, while also making them lighter than many carbon wheels. More importantly, a Zero Bead Hook all but gets rid of the aforementioned weak spot in the rim that's plagued riders with flat spots and dents for decades. If you happen to be one of those riders that enjoys riding your four-inch travel XC bike like it’s a six-inch trail bike, you’re in luck. Our objective of low weight and reliability, at an accessible price, also carries into the Control 29 build. We hand-build each rim to our alloy hubs, which feature DT Swiss internals at the rear and a design that allows for the same spoke lengths at both front and rear, via perfectly tensioned DT Swiss Revolution J-Bend spokes and Pro Lock nipples. We fully support the art of hand-building and do so with our wheels, knowing that real people can catch things that a machine simply cannot. - Rim Type: Alloy clincher, 2Bliss Ready, Zero Bead Hook design - Rim Material: E5 high-strength alloy - Rim Width: 25mm internal - Front Spoke Pattern: Two-cross - Rear Spoke Pattern: Two-cross - Spoke Count: 28h Front, 28h Rear - Spoke Type: DT Swiss Competition Race J-bend - Nipple Type: DT Swiss Alloy Pro Lock hexagonal - Front Hub: Alloy body, 15mm thru-axle, 19 and 31mm OD end cap options included. - Rear Hub: CNC-machined alloy body, high-quality DT Swiss 360 internals, 148mm spacing, XD driver body. - Roval Engineered J-bend hubshells have a single spoke length for each wheelset. - Bearing Type: Sealed cartridge - Assembly Method: Hand-built - Every wheel includes tubeless valve stems in order to make tubeless set-up a touch easier. - Total Wheelset Weight: 1690g
DT Swiss HX 531 27.5-inch
$179.00
This welded, 30mm-wide E-MTB rim is the ideal all-rounder. When you head into the unknown, the HX 531 is the perfect choice with a 30mm internal width to support meaty tires. With an ideal position in the middle of the strength to weight to width range, it works with many tire sizes and is the ideal choice for all eMTB's meant to be ridden on proper MTB terrain.
DT Swiss Tubeless Ready Rim Tape
$25.00
DT Swiss tubeless-ready tape seals the rim for tubeless applications and also works well as rim tape for tube-type setups. - Durable adhesive tape works as a rim tape and airseal
DT Swiss Pro Lock Aluminum Nipples
$69.00
The buyer's choice for wheel builders looking to save weight. ProLock nipples contain a special adhesive compound (by Loctite) which is activated when a spoke is threaded into the nipple, forming a durable bond. - Weight: starting at 20g for 64 nipples
DT Swiss EX 471 27.5-inch
$125.00
No words needed. Just google "EX 471 Leogang World Cup". Let your muscles play on the uphills and switch to attack mode for the downhills. This is exactly what the DT Swiss Enduro rims are made for. Each rim is a piece of high precision engineering and, thanks to the extremely resistant alloy, the EX 471 can cope with the most demanding trails.
DT Swiss RWS MTB Rear Thru Axle
$37.00
When mounting a wheel quickly and safely, the RWS system is untouchable. It combines the fast mounting of a conventional quick release with the force and safety of a fitting. The high-precision toothing at the inside of the lever allows you to fully tighten the axle and perfectly position the lever. - Ratcheting system tightens skewers with turns rather than a cam - Lever can be rotated into an ideal position after tightening
Stan's No Tubes Arch MK3 27.5-inch Rims
$100.00
Designed with input from Stan's Enduro World Series teams, the new Arch MK3 is ready to own every trail. WideRight optimized for maximum stability with 2.25-inch to 2.5-inch tires, Stan's expanded the internal width out to 26mm while keeping the rim incredibly light. The 27.5-inch Arch MK3 weighs only 425g. A new proprietary alloy and stronger, low-profile rim shape means the new Arch MK3 is built to last. Featuring Bead Socket Technology, the new Arch MK3 also offers the unmatched traction, control, and reliability only found on genuine Stan’s NoTubes rims. - The perfect balance of strength and weight - 24% wider than the Arch EX for improved stability with larger tires - Same light weight as the Arch EX - Low-profile shape rolls faster, lasts longer, and helps stop tire pinch flats - 25% stiffer and stronger for improved handling - Lighter and more durable rim shape and alloy - Most trusted tubeless system for easy setup and low maintenance - WideRight optimized for Trail tires
Stan's No Tubes Neo Bearing Kit
$16.00
Replacement bearings for Stan's NoTubes Neo hubs. Includes 2 bearings. - 26mm OD x 15mm ID - 7mm thick
Page 1 of 7 Next page