Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Parts & Accessories

RaceFace CINCH Bolt with Washer 18mm XC/AM
Race Face Cinch aluminum crank arm bolt. 18mm, fits XC/AM cranks.
RaceFace Cinch Crank Bolt/Puller Cap
Replacement crank bolt and puller cap set for Race Face Cinch cranksets.
RaceFace Cinch Drive Side Crank Bolt
Replacement crank bolt for RaceFace Cinch cranks.
Sunlite Cottered Pin
- Sunlite Cottered Pins
absoluteBLACK Chainring Bolt Set - Long Bolts and Nuts Set of 5
absoluteBLACK Chainring Bolts are used to mount chainrings to the crank arms. Bolts are crafted from 7075 T6 aluminum and hard anodized for durability. - Bolts use a Torx T30 interface for greater reliability - Long bolts are used for the following chainrings: 110 BCD 5-bolt outer and inner road oval, 130 BCD 5-bolt outer and inner road oval, 104 BCD oval 26/28/32t, 64 BCD round 26/28/30t, 94 BCD oval 30/32/34t, all CX round chainrings - Set of 5
RaceFace Spindle Spacer
$2.00
RaceFace CINCH Bottom Bracket Spacers - For use with 30mm CINCH spindle systems
RaceFace Cinch Nylon Preloader Crank Assembly
$3.00
Replacement CINCH Preload Ring for non-driveside Race Face CINCH cranks
RaceFace Cinch Nylon Preload Collar and Screw
$6.00
- Preload collar for adjusting tension on bottom bracket bearings - For Race Face 30mm Cinch System cranks only
Wheels Manufacturing 30mm ID Crank Spindle Spacer
$6.25 - $9.00
Used to adjust crank chainline or ensure proper bearing preload when using 30mm spindle cranks. - Inner Diameter: 30mm - Outer Diameter: 41.5mm - Machined engineering-grade Delrin - Sold Individually
Wheels Manufacturing BSA Bottom Bracket Spacer
$6.25
Wheels Manufacturing 2.5mm Black Aluminum Bottom Bracket Spacers are for adjusting chainline or bearing play in English (BSA) or Italian threaded bottom brackets.
RaceFace X-Type Spindle Spacer Kit XC/AM Cranks
$7.00
Replacement spindle spacers for Race Face X-Type XC/AM cranksets.
RaceFace CINCH Puller Cap with Washer 18mm XC/AM
$8.00
Race Face CINCH Crank Puller • Puller cap for Cinch model Race Face cranks only, including Next SL, SixC and Turbine • Puller cap utilizes 16mm hex key • 26mm thread
RaceFace 2008 and earlier Evolve XC Crank Bolt/Puller
$10.00
Race Face steel crank bolt/puller for 2008 and earlier Evolve XC cranks.
RaceFace Alloy Crank Boot
$10.00
Trail riding can be tough on your gear. The ends of your alloy cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots - now made in a smaller version to fit most alloy MTB cranks. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips. Compatible with: - Race Face - Turbine Cinch - Atlas Cinch - Atlas (24mm Spindle) - Turbine (24mm Spindle) - Aeffect Cinch (175mm length ONLY) - Most other popular alloy MTB cranks (except some alloy DH cranksets)
RaceFace Carbon Crank Boots
$10.00
Trail riding can be tough on your gear. The ends of your carbon cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips! Compatible with: - Race Face - Next SL Cinch (G3) - Sixc Cinch - Chester - Respond - Next/Next SL (24mm Spindle) - Sixc (24mm Spindle) - Most other popular carbon MTB cranks and assorted alloy DH cranks
RaceFace Cinch Direct Mount Lockring
$10.00
- 7075-T6 aluminum direct mount spider or lockring to fit Race Face Cinch system splined cranks - RF-3296 spider is required for running 2-ring setups with Boost (Race Face 1x Direct Mount rings work fine with Boost) - Mounts using a common Park BBT-22 tool
SRAM Carbon Crank Arm Boot
$11.00
SRAM’s cranks are strong and tough, ready for any kind of ride. So it’s inevitable that pedal strikes and debris will chip away at the end of the crank. SRAM’s Carbon Crank Boot is an upgrade that combats the wear and tear that comes with hard riding. The boot protects the crank from surface damage and keeps the rider’s style perfectly intact. - For Descendant Carbon and non-Eagle XX1 and X01
SRAM Carbon Crank Arm Boots
$11.00
SRAM’s cranks are strong and tough, ready for any kind of ride. So it’s inevitable that pedal strikes and debris will chip away at the end of the crank. SRAM’s Carbon Crank Boot is an upgrade that combats the wear and tear that comes with hard riding. The boot protects the crank from surface damage and keeps the rider’s style perfectly in tact. - Injection molded plastic crank arm protection - Perfect way to protect your carbon crank investment from scratches and dents from pedal strikes - Material: Injection molded plastic - Recommended Group: XX1, X01, XX, X0
Origin8 Double/Triple Chainring Bolts
$12.00
Secure your chainrings for your ride with Origin-8's Double/Triple Chainring Bolts. Made for double and triple chainrings, each set includes 5 male/female bolts to securely connect your chain rings to the crank. Available in black and silver, as well as aluminum or steel.
Origin8 Single Chainring Bolts
$12.00 - $20.39
Revamp the look of your single speed cranks with some new hardware. Origin-8's Single Chainring Bolts give a high polished look to any crankset. The anodized finish comes in multiple colors to highlight your crank and makes it look as good as you do. You can also choose between steel or aluminum bolts. • Set of 5 male/female bolts • Inside measures 4mm when tightened, 7mm total height
RaceFace 2008+ Next SL and 2012+ Atlas Crank Bolt/Puller
$12.00
Race Face crank bolt/puller for 2008 and newer Next SL cranks and 2012 and newer Atlas cranks.
RaceFace Turbine/Next XC/SixC and 2008+ Deus Crank Bolt/Puller
$12.00
Replacement crank bolt/puller set for Race Face NEXT XC, SIXC, and 2088 and newer Deus cranks.
We The People Legacy Crank Bolt
$12.00
Replacement crank bolt for WeThePeople's Legacy crank.
FSA 30mm Crank Bolt with M30 Cap
$14.00
- M30 cap with self-extracting crank bolt and washer - Compatible with 2013 and newer FSA Gossamer cranks
RaceFace Crank Arm Outer Tab Spacers (Set of 4)
$14.00
Race Face Crank Arm Tab Spacers • Spacers are used to protect the outer chainring tabs and enhance aesthetic when no outer ring or bashguard is used • Fits all Race Face cranksets • Use double bolts
Wheels Manufacturing 29mm ID x 0.5mm Crank Spindle Spacer, Bag of 10
$15.00
Used to adjust crank chainline or take up any slack when using 29mm (SRAM DUB) spindle cranks. - 29mm I.D. for use with SRAM DUB cranks - 10 spacers per bag - Machined engineering-grade Delrin
Wheels Manufacturing 29mm ID x 1mm Crank Spindle Spacer, Bag of 10
$15.00
Used to adjust crank chainline or take up any slack when using 29mm (SRAM DUB) spindle cranks. - 29mm I.D. - 1.0mm thick - 10 spacers per bag - Machined engineering-grade Delrin
Sunlite Aluminum Crankarm (Left)
$19.00
• Square taper interface • Only includes left crank
SRAM DUB Self-Extracting Bolt
$20.00
- Replacement bolt for DUB cranks
Sunlite Aluminum Low Profile Crankarm (Left)
$20.00 - $25.00
• Square taper interface • Only includes left crank • 175mm length
Page 1 of 2 Next page