With a focus on reduced weight and cross-country tuned stopping power, Shimano SLX M7120 brakes provide intuitive modulation so that you can explore your limits with confidence. The BL-M7100 levers feature an optimized lever axle position, an additional handlebar contact point for greater stiffness, and refined ergonomics for rider comfort. At the caliper end, the BR-M7120 4-piston caliper is optimized for the toughest enduro trails. - 10% stiffer than previous generation M7000, even under high-temp conditions - Quicker brake engagement with shorter free stroke - Tool-free lever reach adjustment - I-SPEC EV Clamp Band enables optional integrated shifter setup - Includes finned metal pads
The squeeze of our levers is what dreams are made of (and you know which dreams we're talking about). Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - Reach Adjustment - Qwik-Adjust Barrel Adjuster - Compatible with mechanical disc brakes and linear-pull brakes
$49.00 - $59.00
The CenterLine design provides a smooth, consistent, and quiet running braking surface. Rounded edges make for easier wheel installs and are UCI-compliant. - Rounded edges are UCI-compliant and allow for easier wheel installs - Compatible with both road and mountain bike brakes - Includes steel rotor bolts
The industry standard cable-actuated disc brake since its introduction is still popular due to smooth ball bearing operation and ease of installation and maintenance. - All calipers have 74mm mounting bolt spacing - For use with long cable-pull levers - Pad retraction and spring tension are adjustable - Includes steel-backed sintered pads - Brake Caliper Type: Post Mount - Brake Lever Actuation: Long Pull - Hub/Disc Compatibility: 6-Bolt - Rotor Included: No
$28.00 - $34.00
SRAM road disc brake pads are designed for use with SRAM road hydraulic disc brakes (HRD). - For use with Level Ultimate & Level TLM Brakes - Pad Material: Organic - Type: Road/CX - Includes guide pin, clip, & pad spreader
The CenterLine design provides a smooth, consistent, and quiet running braking surface. Rounded edges make for easier wheel installs and are UCI-compliant. - Rounded edges are UCI-compliant and allow for easier wheel installs (140mm, 160mm, 180mm, 200mm) - Compatible with both road and mountain bike brakes
• Replacement hoods for road brake levers with traditional, non-aero cable routing • Soft, tacky rubber for a sure grip • Available in black or brown
The SRAM CenterLine XR (CLX-R) rotor works in tandem with the SRAM eTap AXS drivetrain. It's designed specifically for road riding — and to keep braking quiet at every stop. - Streamlined form optimized for road use - CenterLine track offers quiet brake operation - Two-piece design reduces weight
$9.00 - $48.00
- Prime 2-piece rotors are for Prime Pro and Expert brakes only - L-series, lightweight one piece rotors - V-cut profile steel rotors for optimum weight-to-performance ratio. Increased surface area over previous designs increases power while cutouts and drillings help keep pads clean - Rotors includes: (1) 6-bolt/44mmBCD rotor, (1) Torx wrench, and (6) T-25 rotor mounting bolts with thread retaining compound - 205g @ 203mm
Working with the world’s best downhill riders has allowed us to develop top-level braking performance. When designing the all-new E-MTB we wanted to create a brake system for the specific needs of modern electric mountain bikes. With the added weight and speed these bikes will typically generate more heat than a typical mountain bike. Our E-MTB system combines the latest technology in braking with existing technology developed on the World Cup Downhill race circuit. The result is not a rebranded downhill brake rather a system that will meet the unique needs of today’s electric mountain bikes. Overall rotor thickness was increased from 1.8mm to 2.3mm which decreases the operating heat of the brake system by 8% and reduces rotor warping (lateral deformation) by 47%. This means with our new 2.3mm thick rotors rider won’t be glazing pads or overheat under the added stress of an electric mountain bike as they would with other brake systems. When designing the 2.3mm specific caliper, material was added to key areas increasing overall stiffness and heat management. This new caliper also received an open top design allowing pads to be inspected or changed without requiring riders to lift a heavy E-MTB to remove the wheel. The E-MTB was topped off with new lever body design to shave weight. However, our renowned Aaron Gwin designed lever blade ensures TRP’s signature modulation would remain unchanged. SPECIFICATIONS G-SPEC E-MTB - 2.3mm Rotor Specific 4 Piston Caliper Design - Must be paired with E2.3 rotor. - Ergonomic Aaron Gwin Designed Lever Blade - Lightweight Hybrid Pistons - Top Loading Pad Design - Sintered Full Metallic Pads - I-spec II Compatible Hinge Clamp Design - SRAM Matchmaker compatible with HD 3.5 Adapter - Weight: 326g (Front)
- Brake Lever Actuation: Hydraulic - Hydraulic Hose Length: 1000 (front), 1700 (rear) - Pad Compound: Resin
Need a replacement line for your Avid hydraulic disc brakes? You're covered with Avid's Hydraulic Line Kit. It's got 2000mm of hose for front or rear application, and all the fittings to work with your brakes.
$44.99 - $49.00
With a focus on reduced weight and cross-country tuned stopping power, the SLX BL-M7100 levers provide intuitive modulation so that you can explore your limits with confidence. They feature an optimized lever axle position, an additional handlebar contact point for greater stiffness, and refined ergonomics for rider comfort. - 10% stiffer than previous generation M7000 even under high-temp conditions - Quicker brake engagement with shorter free stroke - Tool-free reach adjustment - I-SPEC EV Clamp Band enables optional integrated shifter setup
Avid's Rear 170mm Post Bracket Hardware Kit has everything you need to mount a 170mm rotor (sold separately) to the back of your bike. Kits include mounting bolts and a 30mm post mount spacer for rear brake installation.
Riding with complete confidence in your brakes lets you go faster. With Shimano's Deore XT discs you'll be able to hold your speed until the last second in any situation. The post-mount, mono-body caliper design makes this brake super light and extremely rigid. Cooling fins attached to the pads combat the dreaded fade on long downhills and actually make the pads last longer. The 2-finger Servo-Wave levers create quicker brake engagement without reducing pad clearance at the caliper. They also feature both adjustable reach and free-stroke, so you can dial them in to your hand size. Super clean cable routing is a given, and the radial master cylinder is compact and easy to position for superior ergonomics. And should you ever need to bleed them, Shimano's one-way system is a snap. I-Spec B brake levers are not directly compatible with I-Spec shifters and require an additional conversion kit (sold separately).
$144.95 - $145.00
Shimano Deore hydraulic disc brakes are a solid setup, offering reliable power and rigid brake design for all riding styles, from XC to trail. The BL-MT500 brake levers deliver high-powered Servo Wave performance for rapid initial pad contact, along with I-spec II compatibility. These are paired with powerful 4-piston MT520 calipers that help boost rider confidence and enjoyment. - Highly responsive braking power for greater control and modulation - Sleek and durable master cylinder design - 4-piston calipers provide a wider pad contact area - Heat insulated pads and pistons
Sleek, easy to use, yet immensely powerful. Code R packs a winning punch with a reliable DirectLink lever mated to Code’s new oversized four-piston caliper. SRAM’s signature ergonomics are supplemented by the tool-free reach adjust for a fit to each riders’ needs, to unleash Code’s superior braking power, consistency, and modulation. - Four aluminum pistons provide the stopping power and excellent heat management - Stainless steel heat shield breaks the thermal connection between the brakes pads and the caliper body, which reduces fluid temperature - Forged aluminum lever body and blade - Bleeding Edge design for easier maintenance - Includes steel-backed sintered metal pads
One of the most important goals that Odyssey had when they sat down to work on new braking designs was to make the whole system easier to install (and remove) without sacrificing performance. They also wanted to be sure that every component would be very affordable. The Springfield brake drops the two ordinary (and confusing) brake springs and replaces them with one central spring that applies the same force to each arm, requiring no additional adjustment. This makes assembly incredibly easy–just bolt it on and go. The brake arms are designed to maximize stiffness and save weight without adding excessive cost. By die-casting the arms and using shared tooling to make each side, the Springfield meets all of the original design goals, resulting in a very powerful and affordable brake.
Shimano XT BR-M8000 brakes keep the weight low with a 2-finger aluminum lever and an aluminum master cylinder. The calipers feature ceramic pistons and include metallic brake pads. - High rigidity hose for improved brake lever feel and extra-long banjo bolt for improved heat dissipation - I-spec II compatible brake lever with narrow, hinged clamp band frees up handlebar space - Compatible with Ice Tech finned pads - Brakes are pre-bled for convenient setup
Shimano A01S Resin Disc Brake Pads - Fits XTR BR-M975/966/965, Saint BR-M800, XT BR-M776/775/765, SLX BR-M665/601, Deore BR-M596/595/585/545/535, Road BR-R505, Alfine BR-S501/500, LX BR-T665/605 calipers - OEM resin pad for XT BR-M775 and SLX BR-M665 calipers - Resin pad with low noise and excellent power modulation - Backing Plate Material: Steel - Compound: Resin - Heat Sink: No - Pad Shape Number: 20
Magura line service kit - Magura service kits come in a variety of packages to fit your needs. - Shop level kit for servicing Magura brake lines
7 Series Disc Brake Pads - Race compound offers maximum stopping power for those who push their materials to the limits
Magura sleeve nut for mt brakes bag/10 - Small parts used to install hydraulic hose for Magura disc brakes.
Serfas' innovative brake pads provide the ultimate reliable stopping power. - Semi-Metallic For Durability - Compatible With Shimano 2011 and Newer XT, XTR & SLX Brakes - Applicable Hardware Included
$16.00 - $20.00
Jagwire's Mountain Sport Disc Brake Pads (Hayes) feature a low-noise, semi-metallic compound mounted to a steel backing plate for excellent braking performance and durability.
Magura 1-finger hc aluminum disc brake lever with tooled reach adjustment fits mt trail sport black - Replacement lever blades for Magura disc brakes - The ergonomics of the short HC aluminum lever mean that it can reliably deliver full braking power at the touch of just one finger - 1-Finger HC lever blade - Aluminum lever blade
Magura Storm Rohloff Disc Rotor - 4-bolt silver - The Magura Storm disc rotor is designed for use with Rohloff Speedhubs. - Designed to offer exceptional cooling - Low noise - 2mm rotor thickness
Magura type 3. 1 performance pads for louise 2002-6 and louise fr - Performance series disc pads feature a soft, organic compound with excellent power, heat management, and modulation. - Steel backing plate
Magura Storm CL Disc Brake Rotor - Centerlock with lockring for thru axle
$45.00 - $59.00
Smooth, controlled braking is yours with Avid's G2 CleanSweep Rotor. It utilizes cross-drilled technology to dissipate heat and cut weight, giving you a consistent feel at the lever and predictable speed control in all conditions.
Page 1 of 10 Next page