Bikes

The Otso Fenrir is a ride-anywhere bike for bike-packing races and afternoon adventures alike. It can be built with drop bars or with MTB bars and both selections are available as stock build options. A tire clearance of 29” x 2.6” or 27.5” x 2.8” keeps the Fenrir rolling on rough terrain, while the extra frame and fork braze-ons are ready to carry gear for days or weeks on the trail. Like all Otso bikes, the Fenrir has adjustable geometry via the patented Tuning Chip rear dropout system that makes the bike as adaptable as its rider. VERSATILITY While all Otso bikes are known for their versatility, the Fenrir might be the most versatile yet. It was designed to accommodate drop bars with a 50mm stem or MTB bars with an 80mm stem. It can be built with gears or single speed, with a suspension fork or rigid, with a mechanical or electronic drivetrain, or with a dropper or rigid seat post. The ability to fully customize the build of the bike makes the Fenrir as versatile as its rider. FENRIR WITH DROP BARS The Fenrir was designed with the option to be built with drop bars or MTB bars. When configured with drop bars, the Fenrir rides like an extra-capable gravel bike. The relatively longer top tube means a shorter stem is needed with drop bars to align with the rider's preferred reach. It can be built with standard road/CX/gravel bars for rides on local trails or with wider bars to fit a handlebar roll loaded with lots of gear. FENRIR WITH FLAT BARS When built with MTB bars, Fenrir rides like a 90s XC bike. It's fun and lively, yet efficient and Capable with a capital C. It can handle any sketchy descent or technical climb with ease. Because the top tube is relatively short for a mountain bike, a longer stem (80-90mm) is ideal for maintaining reach. Ride it on your local singletrack or load 'er up for that backcountry tour that you've been dreaming about--you know the one. However you choose to build it, Fenrir will ride any road/trail on the map and carry all the gear to get you there. DESIGNED FOR BIKE-PACKING Every last feature of Fenrir Ti is optimized for bike-packing. The titanium frame is strong, smooth, and lighter than steel. It can be built with flat bars or drop bars, depending on your affinity for large handlebar rolls. Single-speed is an option for folks who like simplicity while touring. It has extra mounts on the frame and fork for hauling all the gear you'll need for days (or weeks) on the trail. The frame and fork can clear 29" x 2.6" or 27.5" x 2.8" tires for trails that are especially gnarly. No matter your destination and how long it takes to get there, Fenrir Ti is ready. SINGLE SPEED All metal Otso bikes have the option to be built single-speed or with gears. Fenrir is included in that group because it has a small notch on the rear dropout near the Tuning Chip. If you build your Fenrir with gears but want to convert to single-speed later on, there is a single-speed Tuning Chip ready to order alongside other accessories. There's no wrong way to build your Fenrir. SO MANY MOUNTS A bike-packing bike needs to be able to carry all the gear for days or weeks on the trail. Fenrir has mounts for bottles, fenders, and racks. The Enve fork also has three-pack mounts on either side for sharing the load. CAPABLE GEOMETRY Pick a trail on the map and ride it. Fenrir has the endurance of a gravel bike, with the stability of a mountain bike. Above all, it is Capable with a capital C so you can stay the course and reach your destination. DROPPER FRIENDLY A small port near the bottom of the seat tube allows for the cable routing of a dropper post. If you don't ride with a dropper, you probably won't even notice the port. AMPLE CLEARANCE Tires need to meet the demands of the trail for traction, stability, and comfort. Fenrir can ride up to 29" x 2.6" or 27.5" x 2.8" tires.  

Fast gravel, rough gravel, pavement or dirt. However you choose to roll, this bike does it all. A new composite frameset and adjustable wheelbase make it more capable than ever. With a lightweight Advanced-grade composite frame that's engineered for compliance, Revolt Advanced lets you push your limits on variable terrain. A composite fork eats up bumps, and the D-Fuse seatpost and handlebar absorb shocks and vibrations. A flip chip on the rear dropout adjusts wheelbase and tire clearance, and you can choose the included D-Fuse seatpost for maximum compliance or a 30.9mm round or dropper post. Details including a smart mount system for racks and accessories give you a head start on any gravel riding mission. KEY PERFORMANCE FACTORS Fast and light New Advanced composite frame and fork save more than 160 grams compared to previous model. Updated geometry includes a lower bottom bracket, longer reach and steeper headtube angle for improved acceleration and climbing. Tuned compliance New frame features thinner, dropped seatstays to absorb road shocks and vibrations. D-Fuse handlebar and seatpost work as a system to add compliance without sacrificing stiffness while cornering, sprinting or climbing. Adaptable to the terrain A flip chip on the rear dropout adjusts the wheelbase short for quicker handling, or long for improved stability at speed. The long setting allows for larger diameter tires up to 53mm. You can also choose the included D-Fuse seatpost for maximum compliance, or switch to a 30.9mm round or dropper post.

Voytek changes the fat bike game. It is fast, lightweight, agile, and can handle even the sharpest turns of your local singletrack with ease. Think of it as a mountain bike that can fit fat tires with adjustable geometry. We paired a narrow pedal stance—aka Q factor—with aggressive XC race geometry to build a fat bike that can intuitively handle snowy trails like your mountain bike can handle summer singletrack without sacrificing ride quality. When the weather turns and the snow turns to dirt, swap out the 26" fat wheelset for a 29" MTB wheelset to keep the party going all year. THE Q FACTOR IS THE KEY The Voytek has the narrowest Q factor of any fat bike in the world at 183mm. With a narrow Q factor, your weight is closer to the centerline of the bike. This is especially important when cornering because it allows for tight, responsive control—the wider Q factor found on most fat bikes spreads out your pedals and creates a floppy, unstable feel. The Voytek frame was designed around an 83mm bottom bracket, where most fat bikes have a bottom bracket north of the 100-110mm range. With the Voytek, you don’t need to compromise agile handling to ride up to 4.6" tires. ONE BIKE, THREE WHEELBASE LENGTHS Our Tuning Chip rear dropout is at the heart of the versatile Voytek. With a quick change in positions, the wheelbase of the Voytek can be extended or shortened by up to 20mm, which also changes bottom bracket height by up to 4mm and head tube angle by +/- 0.5º. In the forward position, you’ve got an aggressive, responsive Voytek for your next race. In the rear position, you’ve got that same intuitive handling but with added stability to make it easier to ride in deep snow or adverse terrain. In the middle, well, that’s the best of both worlds. PLUS OR FAT? FAT OR PLUS? We’re internally divided here as to whether the Voytek is a plus bike that can handle fat tires or if the Voytek is a fat bike that has the handling worthy of a plus bike. When the trails are packed with snow, we’re riding 4" tires. When spring comes and the trails turn to dirt, we swap out tires and ride 29" plus until winter returns. The versatility of the Voytek blurs the lines of plus and fat, keeping the party going all year long. MODERN GEOMETRY Voytek's longer top tube, short chainstays – the shortest in the world for a fat bike – and slightly slacker head tube angle mean more speed and more fun. SUSPENSION CORRECT Voytek's suspension-corrected geometry is compatible with an Otso™ carbon rigid fork or up to 120 mm travel suspension fork. COMPETITOR TESTED, ISO APPROVED Voytek's patent-pending frame design exceeds all ISO frame safety standards and has been proven over thousands of miles of test riding, including the legendary Iditarod Invitational and Arrowhead 135 competitions. DROPPER COMPATIBLE The EPS molded carbon frame of the Voytek was designed to accept internally routed dropper seat posts.

The Otso Fenrir is a ride-anywhere bike for bikepacking races and afternoon adventures alike. It can be built with drop bars or with MTB bars and both selections are available as stock build options. A tire clearance of 29” x 2.6” or 27.5” x 2.8” keeps the Fenrir rolling on rough terrain, while extra frame and fork braze-ons are ready to carry gear for days or weeks on the trail. Like all Otso bikes, the Fenrir has adjustable geometry via the patented Tuning Chip rear dropout system that makes the bike as adaptable as its rider. VERSATILITY While all Otso bikes are known for their versatility, the Fenrir might be the most versatile yet. It was designed to accommodate drop bars with a 50mm stem or MTB bars with an 80mm stem. It can be built with gears or single speed, with a suspension fork or rigid, with a mechanical or electronic drivetrain, or with a dropper or rigid seat post. The ability to fully customize the build of the bike makes the Fenrir as versatile as its rider. FENRIR WITH DROP BARS The Fenrir was designed with the option to be built with drop bars or MTB bars. When configured with drop bars, the Fenrir rides like an extra-capable gravel bike. The relatively longer top tube means a shorter stem is needed with drop bars to align with the rider's preferred reach. It can be built with standard road/CX/gravel bars for rides on local trails or with wider bars to fit a handlebar roll loaded with lots of gear. FENRIR WITH FLAT BARS When built with MTB bars, Fenrir rides like a 90s XC bike. It's fun and lively, yet efficient and Capable with a capital C. It can handle any sketchy descent or technical climb with ease. Because the top tube is relatively short for a mountain bike, a longer stem (80-90mm) is ideal for maintaining reach. Ride it on your local singletrack or load 'er up for that backcountry tour that you've been dreaming about--you know the one. However you choose to build it, Fenrir will ride any road/trail on the map and carry all the gear to get you there. OPTIMIZED FOR BIKEPACKING Every last feature of Fenrir is optimized for bikepacking. The stainless steel frame is strong, comfortable, and surprisingly light weight. It can be built with flat bars or drop bars depending on your affinity for large handlebar rolls. Single speed is an option for folks who like simplicity while touring. It has extra mounts on the frame and fork for hauling all the gear you'll need for days (or weeks) on the trail. The frame and fork can clear 29" x 2.6" or 27.5" x 2.8" tires for trails that are especially gnarly. No matter your destination and how long it takes to get there, Fenrir is ready. SINGLE SPEED All metal Otso bikes have the option to be built single speed or with gears. Fenrir is included in that group because it has a small notch on the rear dropout near the Tuning Chip. If you build your Fenrir with gears, but want to convert to single speed later on, there is a single speed Tuning Chip available ready to order alongside other accessories. There's no wrong way to build your Fenrir. SO MANY MOUNTS A bikepacking bike needs to be able to carry all the gear for days or weeks on the trail. Fenrir has mounts for bottles, fenders, and racks. The Enve fork also has three-pack mounts on either side for sharing the load. CAPABLE GEOMETRY Pick a trail on the map and ride it. Fenrir has the endurance of a gravel bike, with the stability of a mountain bike. Above all, it is Capable with a capital C so you can stay the course and reach your destination. DROPPER FRIENDLY A small port near the bottom of the seat tube allows for the cable routing of a dropper post. If you don't ride with a dropper, you probably won't even notice the port. AMPLE CLEARANCE Tires need to meet demands of the trail for traction, stability, and comfort. Fenrir can ride up to 29" x 2.6" or 27.5" x 2.8" tires.

The Otso Fenrir is a ride-anywhere bike for bikepacking races and afternoon adventures alike. It can be built with drop bars or with MTB bars and both selections are available as stock build options. A tire clearance of 29” x 2.6” or 27.5” x 2.8” keeps the Fenrir rolling on rough terrain, while extra frame and fork braze-ons are ready to carry gear for days or weeks on the trail. Like all Otso bikes, the Fenrir has adjustable geometry via the patented Tuning Chip rear dropout system that makes the bike as adaptable as its rider. VERSATILITY While all Otso bikes are known for their versatility, the Fenrir might be the most versatile yet. It was designed to accommodate drop bars with a 50mm stem or MTB bars with an 80mm stem. It can be built with gears or single speed, with a suspension fork or rigid, with a mechanical or electronic drivetrain, or with a dropper or rigid seat post. The ability to fully customize the build of the bike makes the Fenrir as versatile as its rider. FENRIR WITH DROP BARS The Fenrir was designed with the option to be built with drop bars or MTB bars. When configured with drop bars, the Fenrir rides like an extra-capable gravel bike. The relatively longer top tube means a shorter stem is needed with drop bars to align with the rider's preferred reach. It can be built with standard road/CX/gravel bars for rides on local trails or with wider bars to fit a handlebar roll loaded with lots of gear. FENRIR WITH FLAT BARS When built with MTB bars, Fenrir rides like a 90s XC bike. It's fun and lively, yet efficient and Capable with a capital C. It can handle any sketchy descent or technical climb with ease. Because the top tube is relatively short for a mountain bike, a longer stem (80-90mm) is ideal for maintaining reach. Ride it on your local singletrack or load 'er up for that backcountry tour that you've been dreaming about--you know the one. However you choose to build it, Fenrir will ride any road/trail on the map and carry all the gear to get you there. OPTIMIZED FOR BIKEPACKING Every last feature of Fenrir is optimized for bikepacking. The stainless steel frame is strong, comfortable, and surprisingly light weight. It can be built with flat bars or drop bars depending on your affinity for large handlebar rolls. Single speed is an option for folks who like simplicity while touring. It has extra mounts on the frame and fork for hauling all the gear you'll need for days (or weeks) on the trail. The frame and fork can clear 29" x 2.6" or 27.5" x 2.8" tires for trails that are especially gnarly. No matter your destination and how long it takes to get there, Fenrir is ready. SINGLE SPEED All metal Otso bikes have the option to be built single speed or with gears. Fenrir is included in that group because it has a small notch on the rear dropout near the Tuning Chip. If you build your Fenrir with gears, but want to convert to single speed later on, there is a single speed Tuning Chip available ready to order alongside other accessories. There's no wrong way to build your Fenrir. SO MANY MOUNTS A bikepacking bike needs to be able to carry all the gear for days or weeks on the trail. Fenrir has mounts for bottles, fenders, and racks. The Enve fork also has three-pack mounts on either side for sharing the load. CAPABLE GEOMETRY Pick a trail on the map and ride it. Fenrir has the endurance of a gravel bike, with the stability of a mountain bike. Above all, it is Capable with a capital C so you can stay the course and reach your destination. DROPPER FRIENDLY A small port near the bottom of the seat tube allows for the cable routing of a dropper post. If you don't ride with a dropper, you probably won't even notice the port. AMPLE CLEARANCE Tires need to meet demands of the trail for traction, stability, and comfort. Fenrir can ride up to 29" x 2.6" or 27.5" x 2.8" tires.

The Waheela C is a carbon-framed drop bar bike with an adjustable geometry, unrivaled ride quality, and enormous tire clearance for 700c x 54mm, 650b x 54mm, or 29" x 2.1" tires. It has extra frame and fork mounting points for bottles and racks, easily accessible internal cable routing options, compatibility for 1x or 2x electronic or mechanical drivetrains, and the ability to run a dropper post. No matter the road ahead (or under the tire), the Waheela C is ready. GIANT TIRE CLEARANCE Gravel comes in all shapes and sizes, from the packed limestone of Southeast Minnesota to the chunky roads of the Flint Hills of Kansas. The Waheela C is equipped with tire clearance to handle the terrain of your next race. Where most gravel bikes can fit 650b x 50mm but only 40mm with bigger wheels, the Waheela C keeps on rolling, with space for 700c x 54mm tires. It'll run 700c x 35mm when the roads are tacky and tidy, 700c x 42mm when there's a bit more uncertainty, 700c x 54mm when the gravel road turns to ATV trails, and anything in between. The Waheela C can also fit 29" x 2.1", 27.5 " x 2.1", or 650b x 54mm if 700c isn't really your thing. In short, the Waheela C is ready for the road ahead. ADJUSTABLE GEOMETRY Like all Otso bikes, the Waheela C sports our patented Tuning Chip rear dropout system, which allows you to change the length of your wheelbase and height of your bottom bracket. Put the Tuning Chip in the back position to get the stability and comfort of a longer wheelbase for a full day of riding gravel. Switch to the front position to get the agile handling and responsiveness required by your next CX race. And the middle position? That's the best of both worlds. The adjustable geometry of the Waheela C allows you to ride any road or any trail without needing to switch bikes. UNRIVALED RIDE QUALITY Our proprietary Waheela geometry was developed by our engineers for stability, confidence, and comfort on rough terrain. Where many gravel bikes put extra weight on the front wheel, the Waheela C centers the rider over both wheels. This makes for a more stable ride while allowing the compliant rear triangle to come into play and absorb the bumps of a gravel road. Meanwhile, the lightweight EPS molded carbon frame adds responsiveness and readiness for a sprint up that next hill. After a long day on the saddle, you'll find yourself adding a healthy amount of miles to tomorrow's ride. EXTRA MOUNTING POINTS Waheela C features fork bottle bosses, extra down tube mounting points (6 total), as well as top tube gas tank mounting points. Numerous braze-ons allow Waheela C to accommodate water bottles, fenders, racks, frame bags, and more. DETAILS THAT MATTER Internal brake and shifter routing with sleeves, carbon access door under bottom bracket for easier routing, front and rear thru-axle, and threaded bottom bracket for reliable, easy service. This also allows you to run that dropper post you've been dreaming about. COMPATIBLE WITH 1X OR 2X Waheela C is 1x and 2x compatible with mechanical and electronic drivetrains. It's also fully compatible with both Shimano Di2 and SRAM eTap AXS, in case you don't want to take advantage of internal routing options. QUALITY ASSURED Designed by the Otso engineering team, Waheela C frames are manufactured in one of the premier carbon fiber factories in Taiwan and come with a 5-year limited warranty. All bikes are inspected and assembled at our headquarters in Minneapolis, MN, USA.

Our original all-road bike. The Warakin Stainless was one of the first bikes we built when we created Otso in 2016. It's been such a hit over the years that we haven't changed the geometry one bit. Stainless steel has a ride quality that is familiar, yet surprising—smooth like steel, lively like titanium. The Warakin Stainless is ready for your next century, three-day bikepacking trip, or afternoon group ride. STAINLESS STEEL The supple and smooth ride quality of steel meets the corrosion resistance and lively feel of titanium. Stainless steel is lighter than you think, loads of fun, and ready for your next full day on the saddle. It's a frame material that is as unique and seldom used as it is versatile and excellent for multiple types of riding. TIRE CLEARANCE 700c? Check! 650b? Double check! 29er? Triple check! Warakin Stainless has massive tire clearance because no two roads are the same. The Warakin Stainless has clearance for 700c x 51mm, 650b x 51mm, or 29" x 2.1" tires. Race gravel with 700c x 38mm semi-slicks, then swap in 29" x 2.1" for that bikepacking trip with gnarly trails without needing to ride a different bike. TUNING CHIP™ The Tuning Chip rear dropout system allows for adjustable bike geometry by changing the wheelbase by up to 20mm, bottom bracket height by up to 4mm, and head tube angle by 0.2º. This means you can easily switch between a bike with the responsive, agile handling of a shorter wheelbase and a bike with the confidence and stability of a longer wheelbase just by flipping the Tuning Chip. Use the back position for stability and confidence with its longer wheelbase, lower bottom bracket, and slack head tube angle. The front position is ideal for winding singletrack or the CX course with its shorter wheelbase, higher bottom bracket, and steeper head tube angle. The center position is the best of both worlds. TOP PERFORMER Unparalleled ride quality results from the combination of stainless steel and carefully thought out frame geometry. The Warakin Stainless was designed by our engineers in Minnesota and manufactured by top steel frame fabricators in Taiwan. PROGRESSIVE GEOMETRY Warakin’s progressive geometry takes a page from the cross-country MTB playbook. Increased top tube length and a shorter stem maintain stack and reach while providing a lively ‘can-do’ attitude on rougher terrain. DROPPER FRIENDLY A small port near the bottom of the seat tube allows for the cable routing of a dropper post. If you don't ride with a dropper, you probably won't even notice the port. FOR THE LONG HAUL Numerous frame braze-ons allow Warakin to accommodate cable routing clamps, three water bottles, fenders, racks, frame bags, and more. Three braze-ons on either side of the fork allow for additional storage.

Beargrease is our fat tire bike built to go faster than you knew fat tire bikes could go. The super-light frame and fork and the sure-footed rollover of 27.5 x 4.0” wheels and tires cover challenging terrain quickly. Versatile frame and fork mounts let you carry everything you need for the backcountry. Test yourself in a snowy endurance race or pack your camping gear and embark on a long-distance overnight bike trip. - Full carbon frame with super stable geometry, combined with a 100mm suspension corrected carbon fork for precise handling - Bearpaw Carbon fork - 12 x 197mm rear spacing, compatible with 170/177 Salsa Alternator rear rack - Top tube mounts for Salsa EXP Series Toptube Bag or K-edge computer mount - Internally sleeved cable routing, dropper post compatible and 1x-specific frame design - Compatible with multiple wheel sizes

The all-new Epic 8 evolves the formula of fastest through capability, efficiency, and lightweight integration. Modern XC tracks demand more and more capability by the day. Enter Epic 8. Its improved kinematics make it the most efficient pedaling bike we’ve ever tested, while custom valved (and tuned) shocks soak up every bump. It’s a wolf in wolf’s clothing. If you’re an XC racer or prioritize all-out speed in your ride, the Epic 8 is the bike for you. UNMATCHED CAPABILITY: The most capable 120mm bike on the planet. You’ll be blown away by how Epic 8’s progressive geometry delivers technical terrain capability alongside fast and efficient climbing and acceleration performance. The absurd lateral and torsional rigidity of the chassis translates to some seriously precision handling, too. WHAT BUMP?: Compared to the previous generation, the new Epic 8 absorbs 12% more bump and vibration forces than the previous generation, leaving you less fatigued and more powerful over time so you can still push while they suffer. RIDE DYNAMICS TUNED: The Specialized Ride Dynamics team developed custom valving for Epic 8’s new shock. Our unique Ride Dynamics-prescribed damping characteristics holistically elevate the riding experience. By tuning the dampers alongside the chassis’ leverage rates and new kinematics, we’re able to deliver a bike that rides beyond the sum of its parts. BIOMECHANICAL EFFICIENCY: By optimizing the kinematics of the suspension, Specialized’s Ride Dynamics team reduced inefficient pedal-induced bobbing by 20%, while maintaining active suspension for effective bump force management, to ensure you remain in the most efficient pedaling position. It’s the most efficient pedaling suspension bike we’ve ever tested. MORE WITH LESS: With the Epic 8, we didn’t spend a single extra gram to get mega capability from the frame. All models now feature SWAT 4.0 to carry all your trail essentials, and an integrated steering stop to prevent the ubiquitous top tube scar the first time you crash and your bars spin. In fact, the new S-Works Epic 8 frameset has even lost weight (76 grams to be exact) while gaining these new additions. - The most capable 120mm bike on the planet. 12% more bump absorption and 20% less pedal bob - SRAM Level Bronze Stealth 4-Piston brakes feature trail-ready stopping power in a race-ready system - Reliable and durable SRAM Eagle T-Type AXS drivetrain - Lightweight and durable Specialized alloy wheels - Ride Dynamics developed RockShox SIDLuxe Select+ shock and SID Select fork - Custom-tuned shock features 3 unique damper settings - SWAT 4.0 in down tube to carry trail essentials

We created the endurance road category two decades ago proving that high ergonomics means high performance. Today, the new Roubaix SL8 with Future Shock 3.0 is lighter, faster, and smoother than any road bike ever made, unleashing unmatched confidence. The road may be hell below, but on Roubaix, it's always heaven above. - COMPLIANCE: Future Shock 3.0 is the star of the show, more tunable, adjustable, and durable than ever. Now, regardless of position on the bike, every rider experiences 20mm of smooth, stiction-free travel between the stem and head tube. Future Shock helps keep your hands and bars steady for a smoother ride with more control to stay fast, safe, and confident. - Our dropped clamp design exposes more seatpost to increase deflection, but "more" isn't simply better. The Pave seatpost controls that deflection for the optimal vertical compliance. Together they create 'Cobble Gobbler' technology, and when paired with the Roubaix's rigid rear triangle, deliver a smooth ride with no loss in efficiency. - The Roubaix SL8 is the smoothest road bike our Ride Science Team has ever tested-reducing impacts at the bars and saddle by 53% vs. the nearest competition. With Roubaix's Future Shock 3.0 the wheel quickly moves over the bump, while rider mass remains stable, maintaining momentum in rough terrain. Typical forks deflect backward on impact, causing a measurable loss in speed. It's a scientific fact, smoother is indeed faster. - CAPABILITY: The Roubaix pioneered endurance geometry, so you ride "IN" the bike, not "ON" the bike to relieve pressure on your hands, arms, and shoulders for capability and confidence on any road, yet it's ready to dissect a mountain decent at full gas. Snuggle up. - With tire clearance up to 38c/40mm, this endurance road machine delivers better traction than ever on rough roads and even light gravel. Thanks to lightweight, super-efficient Specialized tires, that extra tire volume and traction comes with no downsides. - Roubaix inspires really BIG days on the bike, so we've given it every mount your adventures could need- three bottle mounts, top-tube mounts, and it's even fender-ready. So, go ahead and bring it all along for the ride. - PERFORMANCE: The new Roubaix SL8 is our most aero yet, with new aero shapes from our Free Foil library and dropped seat stays. At just 825 grams, the frame is 50 grams lighter, utilizing lessons learned from the Aethos—the world's lightest production frame—and our premium Fact 12r carbon blend. Nothing in its class is faster or lighter than the Roubaix.

STATUS 2 finds the boundaries of mountain bikes and pushes past them. Is it a trail bike? Yes. Park bike? Yep. Cruise to the convenience store and stop for a stealth session on a concrete wall ride? Oh yeah. STATUS 2 is a bike meant to be ridden, however or wherever you ride. Whether you are on the trails, at the bike park, in the streets, or just cutting turns with your friends on a local hill, the STATUS 2 will allow you to ride your way. BUILT BY RIDERS: Each build starts with a super strong M5 alloy chassis and tough alloy wheels. Stout suspension, powerful brakes, and popular drivetrain options round out these builds to catch big hits, pedal smooth, and provide a ton of stoppage. It’s not for the gram counter—it’s for those riders who push the boundaries of progression and come back for more. RIDE DYNAMICS TUNED: Before showing up at your doorstep or local bike shop, each STATUS 2 gets a special shock tune from our Specialized Ride Dynamics team—a group that eats, sleeps, and breathes mountain bike suspension. The characteristics of the shock are designed to complement the kinematics of the new STATUS 2 perfectly. LET’S GET PERSONAL: Each model of STATUS 2 features neatly packaged flip chips (located on the Horst pivot link, close to the rear axle) that allow the rider to finely tune the frame’s geometry to their desired ride or terrain. Bikes ship in the high position but can be ‘flipped’ to lower and slacker—8 mm lower bottom bracket and half a degree slacker head tube angle. - 100% Redesigned durable alloy chassis - New, more durable alloy rims - Horst Link geometry adjust flip chip - Updated geometry for more usability - Curated parts spec for your desired ride experience

Voytek changes the fat bike game. It is fast, lightweight, agile, and can handle even the sharpest turns of your local singletrack with ease. Think of it as a mountain bike that can fit fat tires with adjustable geometry. We paired a narrow pedal stance-aka Q factor -with aggressive XC race geometry to build a fat bike that can intuitively handle snowy trails like your mountain bike can handle summer singletrack without sacrificing ride quality. When the weather turns and the snow turns to dirt, swap out the 26" fat wheelset for a 29" MTB wheelset to keep the party going all year. THE Q-FACTOR IS THE KEY The Voytek has the narrowest Q-factor of any fat bike in the world at 183mm. With a narrow Q-factor, your weight is closer to the centerline of the bike. This is especially important when cornering because it allows for tight, responsive control - the wider Q-factor found on most fat bikes spreads out your pedals and creates a floppy, unstable feel. The Voytek frame was designed around an 83mm bottom bracket, whereas most fat bikes have a bottom bracket north of the 100-110mm range. With the Voytek, you don't need to compromise agile handling to ride up to 4.6" tires. ONE BIKE, THREE WHEELBASE LENGTHS Our Tuning Chip rear dropout is at the heart of the versatile Voytek. With a quick change in positions, the wheelbase of the Voytek can be extended or shortened by up to 20mm, which also changes the bottom bracket height by up to 4mm and the head tube angle by +/.5º. In the forward position, you've got an aggressive, responsive Voytek for your next race. In the rear position, you've got that same intuitive handling but with added stability to make it easier to ride in deep snow or adverse terrain. In the middle, well, that's the best of both worlds. PLUS OR FAT? FAT OR PLUS? We're internally divided here as to whether the Voytek is a plus bike that can handle fat tires or if the Voytek is a fat bike that has the handling worthy of a plus bike. When the trails are packed with snow, we're riding 4" tires. When spring comes and the trails turn to dirt, we swap out tires and ride 29" plus until winter returns. The versatility of the Voytek blurs the lines of plus and fat, keeping the party going all year long. MODERN GEOMETRY Voytek's longer top tube, short chainstays – the shortest in the world for a fat bike – and slightly slacker head tube angle mean more speed and more fun. SUSPENSION CORRECT Voytek's suspension-corrected geometry is compatible with an Otso carbon rigid fork or up to 120 mm travel suspension fork. COMPETITOR TESTED, ISO APPROVED Voytek's patent-pending frame design exceeds all ISO frame safety standards and has been proven over thousands of miles of test riding, including the legendary Iditarod Invitational and Arrowhead 135 competitions. DROPPER COMPATIBLE The EPS molded carbon frame of the Voytek was designed to accept internally routed dropper seat posts.

The Waheela C is a carbon-framed drop bar bike with adjustable geometry, unrivaled ride quality, and enormous tire clearance for 700c x 54mm, 650b x 54mm, or 29" x 2.1" tires. It has extra frame and fork mounting points for bottles and racks, easily accessible internal cable routing options, compatibility for 1x or 2x electronic or mechanical drivetrains, and the ability to run a dropper post. No matter the road ahead (or under the tire), the Waheela C is ready. GIANT TIRE CLEARANCE Gravel comes in all shapes and sizes, from the packed limestone of Southeast Minnesota to the chunky roads of the Flint Hills of Kansas. The Waheela C is equipped with tire clearance to handle the terrain of your next race. Where most gravel bikes can fit 650b x 50mm but only 40mm with bigger wheels, the Waheela C keeps on rolling, with space for 700c x 54mm tires. It'll run 700c x 35mm when the roads are tacky and tidy, 700c x 42mm when there's a bit more uncertainty, 700c x 54mm when the gravel road turns to ATV trails, and anything in between. The Waheela C can also fit 29" x 2.1", 27.5" x 2.1", or 650b x 54mm if 700c isn't really your thing. In short, the Waheela C is ready for the road ahead. ADJUSTABLE GEOMETRY Like all Otso bikes, the Waheela C sports our patented Tuning Chip rear dropout system, which allows you to change the length of your wheelbase and the height of your bottom bracket. Put the Tuning Chip in the back position to get the stability and comfort of a longer wheelbase for a full day of riding gravel. Switch to the front position to get the agile handling and responsiveness required by your next CX race. And the middle position? That's the best of both worlds. The adjustable geometry of the Waheela C allows you to ride any road or any trail without needing to switch bikes. UNRIVALED RIDE QUALITY Our proprietary Waheela geometry was developed by our engineers for stability, confidence, and comfort on rough terrain. Where many gravel bikes put extra weight on the front wheel, the Waheela C centers the rider over both wheels. This makes for a more stable ride while allowing the compliant rear triangle to come into play and absorb the bumps of a gravel road. Meanwhile, the lightweight EPS molded carbon frame adds responsiveness and readiness for a sprint up that next hill. After a long day on the saddle, you'll find yourself adding a healthy amount of miles to tomorrow's ride. EXTRA MOUNTING POINTS Waheela C features fork bottle bosses, extra down tube mounting points (6 total), as well as top tube gas tank mounting points. Numerous braze-ons allow Waheela C to accommodate water bottles, fenders, racks, frame bags, and more. DETAILS THAT MATTER Internal brake and shifter routing with sleeves, carbon access door under the bottom bracket for easier routing, front and rear thru-axle, and threaded bottom bracket for reliable, easy service. This also allows you to run that dropper post you've been dreaming about. COMPATIBLE WITH 1X OR 2X Waheela C is 1x and 2x compatible with mechanical and electronic drivetrains. It's also fully compatible with both Shimano Di2 and SRAM eTap AXS, in case you don't want to take advantage of internal routing options. QUALITY ASSURED Designed by the Otso engineering team, Waheela C frames are manufactured in one of the premier carbon fiber factories in Taiwan and come with a 5-year limited warranty. All bikes are inspected and assembled at our headquarters in Minneapolis, MN USA.

Whether you're in it for the love of the climb, the rush of the descent, or the next PR, the Langma Advanced Disc is ready with its re-engineered lightweight aero frame and all-new Giant SLR 36 Disc WheelSystem (select models) with integrated disc brakes, plus custom Liv saddle and handlebars for powerful fit and performance. Accelerate faster The heart of the Langma Advanced is a super-light Advanced-Grade Composite frameset, delivering a powerful stiffness-to-weight ratio for explosive acceleration. Updated truncated ellipse tubing reduces wind drag and boosts sprinting efficiency. Better handling Integrated, flat-mount disc brakes deliver the confidence to carry speed into corners and navigate variable weather conditions. The Langma also accommodates tires up to 32mm, so you can customize your set-up for the road ahead. Vibration canceling The tubeless Giant SLR 36 Disc WheelSystem (select models) reduces drag, while the adjustable Variant Composite Seatpost provides superior compliance, so you get a responsive ride that practically skims over rough roads.

The Crux is the lightest gravel bike in the world, with the exceptional capability of massive tire clearance and performance gravel geometry. It’s not just the ultimate expression of gravel performance, it’s your one-way ticket to gravel enlightenment. This Crux Comp comes spec'd with a reliable and smooth-shifting Shimano GRX 12-speed groupset, tough DT G540 Disc wheels, and 2Bliss Ready, 700x38mm Pathfinder Pro tires that hookup over nasty terrain. - Lightest: 725g S-Works 12r and 825g 10r frames. We took the revolutionary breakthroughs that made Aethos the lightest bike ever and applied them to the Crux. The result? A gravel bike that climbs like a dream, floats over nightmarish terrain, and weighs less than a full bottle in your cage. - Capable: 47c/650b x 2.1” tire clearance. More clearance means more capability. With Diverge-level tire clearance, Crux takes you anywhere you can imagine, at full gas. - Responsive: Nimble, supple, and reactive. Responsive at the pedals. Supple in the saddle. With performance gravel geometry and race-influenced fit inspired by Crux’s iconic history in ‘cross.

Big adventures require a bike that can rise to the occasion. Arctodus is named after Arctodus simus, an Ice Age behemoth that was the largest bear to ever walk the Earth. Like its namesake, Arctodus the bike is versatile, strong, and ready to explore. It has adjustable geometry, a durable steel frame, a massive front triangle for a frame bag, lots of cargo mounts, and can clear the biggest fat bike tires on the market. Arctodus is ready for afternoon exploration, polar expeditions, and everything in between. - The Biggest Tire Clearance Arctodus was built around a 26" x 4.8" tire for optimal handling and control on loose trails. It can fit the biggest fat bike tires in the world. The biggest fat tire on the market is 26" x 5.05" and Arctodus eats them like a snack with room to spare. Same as 27.5" x 4.5", the biggest 27.5" tire available. Arctodus is the only bike to clear tires this big with a 12-speed drivetrain without chain interference. When a bike is created for big rides with fresh snow, it needs to fit tires that were designed for the same reason. This is a bike that prays for snow and cuts its own trail. - One Bike, Three Wheelbase Lengths A key feature in all Otso bikes is adjustable geometry and the ability to adapt the bike for the ride ahead. The patented Tuning Chip rear dropout system can change wheelbase length by up to 20mm, raise or lower the bottom bracket height by up to 4mm, and change the head tube angle by +/- 0.5º. Use the rear position when the trails are loose and you need as much control as you can get. Use the front position when the snow is firm and the trails let you take turns with a little speed. No matter the conditions, Arctodus has an answer. - Designed for Exploring There's no need to wait for the trail groomer. Arctodus was made for foot trails, forest paths, and snow-covered frozen lakes. The bombproof steel frame can withstand the demands of an expedition. A large front triangle can fit a healthy full-frame bag. The carbon fork has mounts on either side for cargo. A rear frame can be attached via mounts on the seat stays and Tuning Chip hardware. Even the geometry is catered for exploration, with extra trail for optimal flotation and bottom bracket height that will ride above deeper snow. Whether you're exploring local trails or a national forest, you can trust Arctodus to keep you riding. - Narrow Q Factor Arctodus has a 100mm bottom bracket. This is 30-40mm narrower than other fat bikes that have the same tire clearance. Ride with massive tires without compromising handling. - Suspension Correct All Otso frames feature suspension-corrected geometry. Arctodus is compatible with suspension forks that have up to 120mm of travel. A few options are available on the Custom Bike Builder. - Stability and Floatation Arctodus geometry was designed for optimal riding on fresh trails. The 68º head tube angle paired with massive tires gives Arctodus more trail than other fat bikes. Even the BB height was selected for clearance in deep snow. - Dropper Compatible Snowy trails are good with dropper posts, too. A port near the bottom bracket fits a cable and housing for a cable-actuated dropper post.

ROCK THE MULLET STYLE OR GO ALL IN ON 29. EITHER WAY, THIS NEW ENDURO RIPPER IS MADE TO PUSH LIMITS ON HARD-CHARGING TERRAIN. UPDATED SUSPENSION EATS UP ROCKS, DROPS AND WHATEVER THE TRAIL THROWS YOUR WAY. AND A THREE-POSITION FLIP CHIP LETS YOU ADJUST ALL THE ANGLES TO DIAL IT IN JUST RIGHT. KEY PERFORMANCE FACTORS Race-bred suspension A new Maestro rear suspension system with longer travel (160mm) was developed and tested under the extreme conditions of Enduro World Series races. The trunnion mount shock has a longer stroke (62.5mm compared to 60mm on the previous generation). And the Advanced Forged Composite upper rocker arm adds stiffness and lowers overall weight. Adjustable enduro geometry New flip chip technology lets you switch between three settings depending on the terrain. You can select a 63.5, 63.9 or 64.2-degree head angle and corresponding 78.3, 78.7 or 79-degree seat tube angle, resulting in a 35, 30 or 25mm bottom bracket drop (size medium) to fine-tune handling for trail conditions, riding style and rear-wheel size. Rear wheel options Riders can choose either a 29- or 27.5-inch rear wheel, paired with a 29-inch front wheel. The larger 29-inch option improves stability and roll-over capabilities, while the 27.5 option delivers a more agile, snappier feel. It's a quick and easy change to adjust the bike's handling and feel. HIGHLIGHTS The geometry of the ALUXX SL aluminum frameset has been updated to accommodate 29-inch wheels, and you now have the option to run a "mullet" setup with a 27.5 rear wheel. This translates into a short chainstay length, a shorter reach, and geometry that can be adjusted via a three-position flip chip. An updated Maestro suspension system delivers 160mm of rear wheel travel mated to a 170mm fork. And new integrated down tube storage provides convenient carrying capacity for trail riding essentials.

The Lightest, Fastest Alloy Full Suspension Bike in the World gets a full makeover with the ultra-capable EVO build. Still 18.4% lighter than the closest competitor and sharing geometry and kinematics from our downcountry-hungry Epic 8 EVO, the all-new Chisel Comp EVO delivers the performance you can feel and is spec’d for the ultimate downcountry experience. SPEED METAL: With D’Aluisio Smartweld technology, the Chisel Comp EVO boasts the lightest aluminum XC frameset in its class. Each highly manipulated frame tube features continuously varied wall thicknesses and shaping that deliver stiffness where you need it– for efficiency – and ride-smoothing compliance where you want it—for comfort and optimal control. UNMATCHED CAPABILITY: With a slew of trail-ready specs, including a bump up to 130mm of travel up front, the Chisel EVO eats up the chunk and feels right at home on the rough stuff. Advanced suspension kinematics, Ride Dynamics tuned suspension, and progressive geometry, can all be found in the Chisel Comp EVO, making it more than capable of handling big rides with confidence and speed. INCREDIBLE EFFICIENCY: The Chisel Comp EVO is the most efficient pedaling bike in its class, thanks to the utilization of geometry and kinematics that went into our Epic 8 EVO platform. The steep seat tube positions you in the optimal pedaling position to save energy for the long rips down. Honed anti-squat reduces pedal-bob. Put it together, and Chisel Comp EVO translates every watt applied to the pedals into maximum forward motion. SMOOTHER IS FASTER: We engineered a flex stay rear end for class-leading suspension performance while eliminating the extra weight and maintenance associated with pivots required in a traditional design. More common on carbon bikes, extensive field and lab testing proves that Chisel Comp EVO has achieved the impossible—the efficiency, control, and lightweight of a flex stay design in the advanced alloy. HYDROFORMED ALLOY: Chisel Comp EVO shaves extra material and weight with a one-piece hydroformed seat tube that integrates the seat tube pivot, main pivot, and BB shell. On a more traditional bike, the seat tube is typically just a "tube" with pivots and BB shell welded on. - D’Aluisio Smartweld hydroformed tubes and engineered tube junctions, flip chip geo adjust, 110mm travel - FOX 34 Performance Elite 130mm with Grip 2 damper - Ride Dynamics Tuned FOX FLOAT Performance rear shock - TranzX dropper post (100mm-170mm) - SRAM GX Eagle Rear derailleur - SRAM G2 RS 4-piston brakes - Specialized Purgatory Grid T9 tire (front) - Specialized Ground Control Grid T7 tire (rear) - 20mm Rise Handlebars

Built for the rigors of America's longest mountain bike race, the Tour Divide-inspired Cutthroat C GRX 600 1x is one of the best bikepacking bikes for long rides through a variety of conditions and surfaces when speed is of the essence. Designed with drop-bar mountain bike geometry and a lightweight carbon frame featuring our Class 5™ VRS for comfortable compliance, Cutthroat is ready to put in big miles on any terrain. Ample cargo mounts let you distribute weight evenly around the bike for maximum maneuverability. Shimano's GRX 600 1x drivetrain provides brilliant braking and shifting with the gear range for gravel flats and mountain passes alike.

The Mukluk is Salsa's most versatile fat bike, designed and engineered to excel in a wide variety of conditions. The frame utilizes 197mm rear spacing to accommodate up to 5" tires, and the 100mm threaded bottom bracket allows a wide range of crank (Q-factor) choices. Alternator 1.0 dropouts allow for short chainstays and easily support single speed or geared drivetrain options. The Mukluk can do it all.

Turn up the heat on technical trails, and do it with more confidence and control. Featuring updated suspension and adjustable geometry, this feisty 29er adapts to the terrain. This versatile trail machine is built on a lightweight, stiff and super-strong ALUXX SL frameset that blends our latest Maestro suspension technology with adjustable frame geometry. The Advanced Forged Composite rocker arm has a flip chip that allows you to adjust frame geometry. Choose steeper or slacker headtube/seattube angles and either a 35mm or 45mm bottom bracket drop to fine-tune the handling for your riding style and terrain. It's designed around a 130mm travel suspension fork, and the overall geometry has been tuned to maximize its performance on rugged trails.

CHOOSE THE LONGER ROUTE. CLIMB HIGHER MOUNTAINS. THIS SMOOTH-RIDING ENDURANCE ROAD BIKE IS MADE FOR LONG-DISTANCE RIDES ON ALL TYPES OF ROADS. KEY PERFORMANCE FACTORS Engineered compliance Advanced Composite frame is engineered for endurance road riding. The D-Fuse seatpost and handlebar absorb road shocks and vibrations, and its smooth ride quality means you’ll feel less fatigue on long rides. Total control Seamless disc-brake integration including flat mounts and 12mm front and rear thru-axles produces more consistent braking power for better control, even in wet weather and on rough roads. Versatility Endurance road geometry, plenty of tire clearance (up to 35mm), and disc-brake integration allow you to tackle a variety of roads and conditions, from smooth pavement to rugged mountain passes. TECHS & FEATURES ADVANCED COMPOSITE TECHNOLOGY Giant’s High-Performance Grade raw carbon material is used to produce this custom frame material in our own composite factory with a high stiffness-to-weight ratio. The front triangle of these framesets is assembled and molded as one continuous piece in a proprietary manufacturing process called Modified Monocoque Construction. D-FUSE TECHNOLOGY The D-Fuse seatpost and handlebar were designed to function as a system, absorbing road shocks, and vibrations so you can ride farther, faster. OVERDRIVE Giant’s original oversized fork steerer tube technology. Designed to provide precise front-end steering performance, the system’s oversized headset bearings (1 1/4" lower and 1 1/8" upper for road, 1 1/2" lower and 1 1/8" upper for mountain) and tapered steerer tube work in conjunction to provide optimal steering stiffness. COMPACT ROAD DESIGN Introduced by Giant with the professional Team ONCE in the 1990s, Compact Road revolutionized the look and feel of high-performance road bikes forever. A downward-sloping toptube (from the headtube to the seattube) creates smaller front and rear triangles for a lighter, stiffer bike. It also makes it easier for riders of all sizes to have a perfect fit. TUBELESS SYSTEM Fewer flat tires. Greater traction. Less rolling resistance and a smoother, faster ride. Giant’s Tubeless System makes it easier than ever to experience all these benefits.

Washboard descents, sketchy dirt, gravel and rocks of all shapes and sizes. You never know what you'll get on a gravel ride. This new Revolt with front suspension helps you float through it all with speed and control. Smooth control Composite frameset is designed specifically for front suspension. With 40mm of travel, the fork absorbs bumps and impacts so you can ride smoother and faster over rugged gravel and dirt. Tuned compliance Lowered seatstays with smaller diameter tubes absorb road shocks and vibrations. A Contact SL XR D-Fuse handlebar adds more compliance without sacrificing the stiffness needed for cornering, sprinting or climbing. Adaptable to the terrain A flip chip on the rear dropout adjusts the wheelbase: short for quicker handling, or long for improved stability at speed. The long setting also allows for larger diameter tires up to 53mm. You can use the included dropper/suspension seatpost for added capabilities, or switch to a proprietary D-Fuse seatpost or traditional 30.9mm round seatpost.

We created the endurance road category two decades ago proving that high ergonomics means high performance. Today, the new Roubaix SL8 with Future Shock 3.0 is lighter, faster, and smoother than any road bike ever made, unleashing unmatched confidence. The road may be hell below, but on Roubaix, it’s always heaven above. COMPLIANCE: Future Shock 3.0 is the star of the show, more tunable, adjustable, and durable than ever. Now, regardless of position on the bike, every rider experiences 20mm of smooth, stiction-free travel between the stem and head tube. Future Shock helps keep your hands and bars steady for a smoother ride with more control to stay fast, safe, and confident. Our dropped clamp design exposes more seatpost to increase deflection, but “more” isn’t simply better. The Pavé seatpost controls that deflection for the optimal vertical compliance. Together they create AfterShock technology, and when paired with the Roubaix’s rigid rear triangle, deliver a smooth ride with no loss in efficiency. The Roubaix SL8 is the smoothest road bike our Ride Science Team has ever tested—reducing impacts at the bars and saddle by 53% vs. the nearest competition. With Roubaix’s Future Shock 3.0 the wheel quickly moves over the bump, while rider mass remains stable, maintaining momentum in rough terrain. Typical forks deflect backward on impact, causing a measurable loss in speed. It’s a scientific fact, smoother is indeed faster. CAPABILITY: The Roubaix pioneered endurance geometry, so you ride “IN” the bike, not “ON” the bike to relieve pressure on your hands, arms, and shoulders for capability and confidence on any road, yet it’s ready to dissect a mountain decent at full gas. Snuggle up. With tire clearance up to 38c/40mm, this endurance road machine delivers better traction than ever on rough roads and even light gravel. Thanks to lightweight, super-efficient Specialized tires, that extra tire volume and traction comes with no downsides. Roubaix inspires really BIG days on the bike, so we’ve given it every mount your adventures could need—three bottle mounts, top-tube mounts, and it’s even fender-ready. So, go ahead and bring it all along for the ride. PERFORMANCE: The new Roubaix SL8 is our most aero yet, with new aero shapes from our Free Foil library and dropped seat stays. At just 950 grams, the frame is lighter, utilizing lessons learned from the Aethos - the world’s lightest production frame - and Fact 10r carbon blend. Nothing in its class is faster or lighter than the Roubaix.

The Lightest, Fastest Alloy Full Suspension Bike in the World. 18.4% lighter than the closest competitor and sharing geometry and kinematics from our World Cup ready Epic 8 mountain bike, the all-new Chisel delivers performance you can feel—whether you’re racing “between the tape” or ripping solo hot laps on local trails. SPEED METAL: Thanks to D’Aluisio Smartweld, the Chisel boasts the lightest aluminum XC frameset in its class. Each highly-manipulated frame tube features continuously-varied wall thicknesses and shaping that deliver stiffness where you need it - for efficiency - and ride-smoothing compliance where you want it - for comfort and optimal control. UNMATCHED CAPABILITY: With 110mm of Ride Dynamics tuned suspension, the high performance pedigree of Chisel can be traced directly to the Epic 8, our World Cup race machine. DNA from the Epic 8’s advanced suspension kinematics, Ride Dynamics tuned suspension, and progressive geometry honed on technical World Cup courses can all be found in the Chisel, making it more than capable of handling varied terrain with confidence and speed. INCREDIBLE EFFICIENCY: Chisel is the most efficient pedaling bike in its class, thanks to the utilization of geometry and kinematics that went into our World Cup racing Epic 8 platform. The steep seat tube positions the rider in the optimal pedaling position. Honed anti-squat reduces pedal-bob. Put it together and Chisel translates every watt applied to the pedals into maximum forward motion. SMOOTHER IS FASTER: We engineered a flex stay rear end for class-leading suspension performance, while eliminating the extra weight and maintenance associated with pivots required in a traditional design. More common on carbon bikes, extensive field and lab testing prove that Chisel has achieved the impossible—the efficiency, control, and light-weight of a flex stay design, in advanced alloy. HYDROFORMED ALLOY: Chisel shaves extra material and weight with a one-piece hydroformed seat tube that integrates the seat tube pivot, main pivot, and BB shell. On a more traditional bike, the seat tube is typically just a "tube" with pivots and BB shell welded on. - Frame - D’Alusio Smartweld hydroformed tubes and engineered tube junctions, Flip chip geo adjust, 110mm travel - RockShox's SID 120mm fork, featuring their Rush Damper - Ride Dynamics Tuned Rockshox Deluxe Select+ rear shock - TranzX dropper post - SRAM GX Eagle Rear derailleur

The Trust Tool for Any Trail Like the reliable tool you grab for every job, the Smuggler is the go-to bike for any trail pointed up, down, and all around. With dual 29 inch wheels, 130mm rear and 140mm front travel, the Smuggler may just be the most versatile bike in our lineup. A highly progressive leverage curve and comfortable, confidence-inspiring geo make it eager to keep going mile after mile while remaining surefooted in even the most technical terrain. Sitting squarely between the Spur and Sentinel in travel, geometry, and capability, it shares qualities of both. Inspiring and rewarding to hammer on your favorite singletrack, while never holding you back when the trail gets steep, the Smuggler will make sure you enjoy it all.

The Warakin Ti is an efficient, responsive, sprightly titanium bike that can handle any road in any weather. Using the progressive geometry of its Warakin Stainless predecessor, the Warakin Ti pairs unrivaled ride quality with the superior quality of titanium. It's a lightweight, durable, lively machine that will carry the rider to where they choose to go while enjoying every pedal stroke along the way. SUPERIOR TITANIUM The 3Al/2.5V B338 grade 9 titanium that we use for the Warakin Ti is the same titanium that has been a bicycle industry favorite for decades, and with good reason. Equal parts science and magic, titanium is durable, lightweight, lively, corrosion-resistant, and timeless. The tubing is seamless, butted, clean, and strong. It's because of the superior quality of titanium that we chose this material to lend to our heralded Warakin geometry as a bike that will endure the roughest roads in the harshest conditions and tell the stories for decades to come. EXTRA TIRE CLEARANCE If a bike is meant to ride any road in any condition, it needs to fit tires and wheels that will get you to and from your destination, while handling every bump along the way. The massive tire clearance of the Warakin Ti was built with this in mind. It'll fit 29" x 2.1" for that road that doesn't actually appear on the map, just as easily as 650b x 50mm for windy forest trails, or 700c x 35mm (or 700c x 50mm if you want a little extra) for your next gravel race. Because a frame that can last forever needs to have the ability to adapt to whatever the road (and the future) may bring. VERSATILITY Like all Otso bikes, the Warakin Ti sports our patented Tuning Chip rear dropout system, which allows the rider to lengthen or shorten the wheelbase by up to 20mm and raise or lower the bottom bracket by up to 4mm. For chunky gravel on remote roads, the longer wheelbase of the rear position is set for stability and comfort. For a quick spin around town or the CX course, the front position makes for snappy handling and agile control. The middle position? That's the best of both worlds. The Tuning Chip rear dropout system was designed because the bike should be just as versatile as its rider. TOP QUALITY Designed by the Otso engineering team, Warakin Ti frames are built by top fabricators in Taiwan and come with a five-year limited warranty. All bikes and frames are inspected and assembled at our headquarters in Minneapolis, MN USA. PROGRESSIVE GEOMETRY The progressive geometry of the Warakin Ti takes a page from the cross-country MTB playbook. Increased top tube length and a shorter stem maintain stack and reach while providing a lively ‘can-do’ attitude on rougher terrain. EXTRA MOUNTING OPTIONS Numerous braze-ons accommodate three bottles, fenders, racks, cable routing clamps, frame bags, and more. Mix in the Wolf Tooth B-RAD System to even further increase on-bike storage options. SUSPENSION-READY The geometry of the Warakin Ti includes an axle-to-crown measurement of 420mm, which allows for a shorter suspension fork.

Built to cover ground, mow over techy singletrack, and charge down aggressive terrain, the Intrigue Advanced Pro 29 prefers the rowdy side of life.

Voytek changes the fat bike game. It is fast, lightweight, agile, and can handle even the sharpest turns of your local singletrack with ease. Think of it as a mountain bike that can fit fat tires with adjustable geometry. We paired a narrow pedal stance—aka Q factor—with aggressive XC race geometry to build a fat bike that can intuitively handle snowy trails like your mountain bike can handle summer singletrack without sacrificing ride quality. When the weather turns and the snow turns to dirt, swap out the 26" fat wheelset for a 29" MTB wheelset to keep the party going all year. THE Q FACTOR IS THE KEY The Voytek has the narrowest Q factor of any fat bike in the world at 183mm. With a narrow Q factor, your weight is closer to the centerline of the bike. This is especially important when cornering because it allows for tight, responsive control—the wider Q factor found on most fat bikes spreads out your pedals and creates a floppy, unstable feel. The Voytek frame was designed around an 83mm bottom bracket, where most fat bikes have a bottom bracket north of the 100-110mm range. With the Voytek, you don’t need to compromise agile handling to ride up to 4.6” tires. ONE BIKE, THREE WHEELBASE LENGTHS Our Tuning Chip rear dropout is at the heart of the versatile Voytek. With a quick change in positions, the wheelbase of the Voytek can be extended or shortened by up to 20mm, which also changes bottom bracket height by up to 4mm and head tube angle by +/- 0.5º. In the forward position, you’ve got an aggressive, responsive Voytek for your next race. In the rear position, you’ve got that same intuitive handling but with added stability to make it easier to ride in deep snow or adverse terrain. In the middle, well, that’s the best of both worlds. PLUS OR FAT? FAT OR PLUS? We’re internally divided here as to whether the Voytek is a plus bike that can handle fat tires or if the Voytek is a fat bike that has the handling worthy of a plus bike. When the trails are packed with snow, we’re riding 4” tires. When spring comes and the trails turn to dirt, we swap out tires and ride 29" plus until winter returns. The versatility of the Voytek blurs the lines of plus and fat, keeping the party going all year long. MODERN GEOMETRY Voytek's longer top tube, short chainstays – the shortest in the world for a fat bike – and slightly slacker head tube angle mean more speed and more fun. SUSPENSION CORRECT Voytek's suspension-corrected geometry is compatible with an Otso™ carbon rigid fork or up to 120 mm travel suspension fork. COMPETITOR TESTED, ISO APPROVED Voytek's patent-pending frame design exceeds all ISO frame safety standards and has been proven over thousands of miles of test riding, including the legendary Iditarod Invitational and Arrowhead 135 competitions. DROPPER COMPATIBLE The EPS molded carbon frame of the Voytek was designed to accept internally routed dropper seat posts.

Grand Touring In Aluminum Excellence. Take off and go the distance in our most comfortable trike yet. The GTS (Gran Tourismo Sport) perfectly meshes comfort with performance, giving riders a sporting experience. A solid 7000 series aluminum frame creates a lightweight ride which dampens vibration, adding to your comfort. The frame also features a rear triangle design, made to make every pedal stroke as efficient as possible. A new larger boom also enhances stiffness, giving a solid-feeling ride. Precision control is at your fingertips with the Shimano Deore hydraulic brakes, while trail-commanding deep profile rims and Schwalbe Tryker tires push you forward. Ride for hours in the new Sport Touring seat, constructed from a light breathable mesh to keep you cool and comfortable. The seat also features an adjustable mid-back section for personalized comfort. The seat is attached using the new Wishbone seat stay design, built to improve stability and handling. Improved Stability: - New Wishbone seat stays improve stability and handling. Extremely Lightweight: - A solid 7000 series aluminum frame provides a lightweight ride. Maximum Comfort: - The new two-piece fully adjustable Sport Touring seat offers maximum comfort. Precision Control: - Shimano Deore hydraulic brakes provide precision control. Ride Acceleration: - Custom deep profile rims paired with Schwalbe Tryker tires accelerate your ride.